OP Ballot ASC2021-02 ISO 10110-1, -5, -7, -8, & -18 Identical Adoption, Due December 23, 2021 (Closed, Approved with Comments)

Proposed documents and ballot materials
• ANSI/OEOSC/ISO 10110-01:2019 - Part 1: General: PDF
• ANSI/OEOSC/ISO 10110-05:2015 - Part 5: Surface form tolerances: PDF
• ANSI/OEOSC/ISO 10110-07:2017 - Part 7: Surface imperfections: PDF
• ANSI/OEOSC/ISO 10110-08:2019 - Part 8: Surface texture: General: PDF
• ANSI/OEOSC/ISO 10110-018:2018 - Part 18: Stress birefringence, bubbles and inclusions, homogeneity, and striae: PDF
• Ballot ASC2021-02: PDF
• Commenting template: DOC

Results of Voting
• Voting Summary: PDF
• Comments Received and Responses: PDF
• ANSI/OEOSC/ISO 10110-01:2019 - Part 1: General: (Post Ballot Manuscript) PDF
• ANSI/OEOSC/ISO 10110-05:2015 - Part 5: Surface form tolerances: (Post Ballot Manuscript) PDF
• ANSI/OEOSC/ISO 10110-07:2017 - Part 7: Surface imperfections: (Post Ballot Manuscript) PDF
• ANSI/OEOSC/ISO 10110-08:2019 - Part 8: Surface texture: General: (Post Ballot Manuscript) PDF
• ANSI/OEOSC/ISO 10110-08:2019 - Part 8: Surface texture: General: (Post Ballot Manuscript) PDF

OP Ballot ASC2021-01: Revised Operating Procedures, Due July 05, 2021 (Closed, Approved with Comments)

Proposed document and ballot materials
• Procedures with proposed changes highlighted: PDF
• Proposed procedures clean copy: PDF
• Ballot ASC2021-01: PDF
• Commenting template: DOC

Results of Voting
• Voting Summary: PDF
• Comments Received and Responses: PDF
• Approved Revised ASC OP Operating Procedures (Bylaws): PDF

OP Ballot ASC2019-01: OP1.007 IR Spectral Bands. Due May 12, 2019 (Closed, Approved with Comments)

Proposed document and ballot materials
• Proposed manuscript of OP1.007-0000, IR Spectral Bands: PDF
• Ballot ASC2019-01: PDF
• Commenting template: DOC


Results of Voting
• Voting Summary: PDF
• Comments Received and Responses: PDF
• Revised manuscript for BSR8: PDF

OP Ballot ASC2018-02: Due Sep 18, 2018 (Closed, Approved with Comments)

Proposed document and ballot materials
• Proposed manuscript of OP1.007-0000, IR Spectral Bands: PDF
• Ballot ASC2018-02: PDF
• Commenting template: DOC


Results of Voting
• Voting Summary: PDF
• Comments Received and Responses: PDF

OP Ballot ASC2018-01: Due April 27, 2018 (Closed, Approved)

Proposed document and ballot materials
• Procedures with proposed changes highlighted: PDF
• Proposed procedures clean copy: PDF
• Ballot ASC2018-01: PDF
• Commenting template: DOC
Results of Voting
• Voting Summary: PDF
• Comments Received and Responses: None

OP Ballot ASC2017-01: Due May 31, 2017 (Closed, Approved)

Proposed document and ballot materials
• Proposed new Page 4 for OP1.002: PDF
• Ballot ASC2017-01: PDF
• Commenting template: DOC
Supplementary information
• Background on the new Page 4: PDF
• Complete OP/OEOSC OP1.002, featuring the new Page 4: PDF
Results of Voting
• Voting Summary: PDF
• Comments Received and Responses: PDF

OP Ballot ASC2016-01: Due February 5, 2016 (Closed, Approved)

• OP/OEOSC OP1.002, Optics and Electro-Optical Instruments — Optical Elements and Assemblies — Surface Imperfections: PDF
• Ballot ASC2016-01: DOC
• Commenting template: DOC
• Voting Summary: PDF
• Comments Received: PDF

TF2 Ballot 2015-4: Due August 24, 2015 (Closed, Approved)

• TF2/OEOSC OP1.002, Optics and Electro-Optical Instruments — Optical Elements and Assemblies — Surface Imperfections: PDF
• Ballot 2015-4: DOC
• Commenting template: DOC
• Voting Summary: PDF
• Non-editorial Comments: DOC

TF6 Ballot 2015-2: Due July 19, 2015 (Closed, Approved)

• TF6/OEOSC OP1.008 Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Infrared optical material sampling protocol: PDF
• Ballot 2015-2: DOC
• Commenting template: DOC
• Voting Summary: PDF

OP Ballot 2015-1: Due July 10, 2015

• BSR/OEOSC OP1.007, Draft American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Infrared spectral bands: PDF
• Ballot 2015-1: DOC
• Commenting template: DOC
• Voting Summary: PDF

TF1 Ballot 2014-7: Due June 15, 2014 (Closed; ballot approved, but Chairman is seeking additional feedback from OP)

• BSR/OEOSC OP1.2123 Proposed American National Standard for Optics and Photonics – Specification of Raw Optical Glass: PDF
• Ballot 2014-5: DOC
• Commenting template: DOC
• Voting Summary: not yet available

TF2 Ballot 2014-6: Due June 15, 2014 (Closed; negative vote received. Project leader is reconciling comments and will resubmit)

• v18 of TF2/OEOSC OP1.002, Draft American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Surface Imperfections: PDF
• v18 of TF2/OEOSC OP1.002 with changes marked in yellow: PDF
• Ballot 2014-6: DOC
• Commenting template: DOC
• Voting Summary: not yet available

TF6 Ballot 2014-5: Due May 15, 2014 (Closed; ballot approved. Interim project leader will dispose of comments, and the Standard will be balloted at the OP level)

• TF6/OEOSC OP1.007 Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Infrared spectral bands: PDF
• Ballot 2014-5: DOC
• Collated comments received with disposition: PDF
• Commenting template: DOC
• Voting Summary: PDF

TF3 Ballot 2014-4: Due May 15, 2014 Due October 31, 2014 (Closed; ballot approved. Project leader will dispose of comments and the standard will be reballoted.

• TF3/OEOSC OP1.005 Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Systems – Stastical Evaluation of Surfaces: PDF
• UPDATED VERSION TF3/OEOSC OP1.005 Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Systems – Stastical Evaluation of Surfaces: PDF
• Ballot 2014-4: DOC
• Commenting template: DOC
• Voting Summary: PDF

OP Ballot 2014-3: Due May 15, 2014 Due October 31, 2014 (Closed; standard approved with comments)

• BSR/OEOSC OP1.0110-9 Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 9: Surface treatment and coating: PDF
• Ballot 2014-3: DOC
• Commenting template: DOC
• Voting Summary: PDF
• Collated comments: PDF
• Revised standard for submittal to ANSI: PDF
• Ballot Tabulation: PDF

OP Ballot 2014-2: Due May 15, 2014 Due October 31, 2014 (Closed; standard approved, but with editorial comments.)

• BSR/OEOSC OP1.004, Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Optical Wavefront Measurement: PDF
• Ballot 2014-2: DOC
• Commenting template: DOC
• Comments received at TF level with PL responses: PDF
• BSR/OEOSC OP1.004, with redlines from previous version: PDF
• Voting Summary: PDF
• Comments received from QED, NGC, and Riyo: PDF, PDF, PDF
• Ballot Tabulation: PDF

OP Ballot 2014-1: Due May 15, 2014 (Closed; all resolutions approved)

• Resolutions from ASC OP annual meeting in 2014 at Photonics West.
• Ballot 2014-1: DOC
• OP Membership roster as of April 2014: PDF
• Voting Summary: available on request

TF2: Due January 31, 2014 (Closed; standard approved, with comments. The PL has reviewed and replied to all comments, and proposed a new draft for discussion at the TF level)

• BSR/OEOSC OP1.002, Draft American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Surface Imperfections: PDF
• Issues raised in version 16: PDF
• Ballot 2013-10: DOC
• PL response to comments received: PDF
• PL response to survey responses: PDF
• PL proposed new draft: PDF
• PL proposed new Annex N-1: PDF
• PL proposed new Annex I-5: PDF
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: Due December 31, 2013 Due January 16, 2014 (Closed; both standards approved with editorial comments only for OP1.0110-5. Standard will be re-balloted if material changes are required)

• BSR/OEOSC OP1.0110-5 Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 5: Surface form tolerances: PDF
• BSR/OEOSC OP1.0110-9 Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 9: Surface treatment and coating: PDF
• Ballot 2013-8: DOC
• ASC OP comments form: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: Due September 30, 2013 October 4, 2013 October 18, 2013 (Closed; all standards approved with editorial comments only)

• UPDATED VERSION BSR/OEOSC OP1.0110-12 Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 12: Aspheric surfaces: PDF
• BSR/OEOSC OP1.0110-12 Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 12: Aspheric surfaces: PDF
• BSR/OEOSC OP1.0110-8 Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 8: Surface texture, roughness and waviness: PDF
• BSR/OEOSC OP1.9211-4 Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Coatings – Part 4: Specific Test Methods: PDF
• Ballot 2013-7: DOC
• ASC OP comments form: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF3: Due September 30, 2013 (Closed; standard approved, with comments. Once comments have been reconciled by the PL, the standard will be balloted at the OP level)

• BSR/OEOSC OP1.004, Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Optical Wavefront Measurement: PDF
• Ballot 2013-6: DOC
• Comments received with PL responses: PDF
• Updated version of BSR/OEOSC OP1.004, with redlines: PDF
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF4: Due September 30, 2013 (Closed; standard approved. The standard will be balloted at the OP level)

• BSR/OEOSC OP1.0110, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of Drawings for Optical Elements and Assemblies – Part 9: Coatings and surface treatments: PDF
• Ballot 2013-5: DOC
• ASC OP comments form: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF4: Due September 30, 2013 (Closed; standard approved, with one editorial comment. Error will be corrected, and the standard will be balloted at the OP level)

• BSR/OEOSC OP1.0110, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of Drawings for Optical Elements and Assemblies – Part 5: Surface form tolerances: PDF
• Ballot 2013-4: DOC
• ASC OP comments form: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: Due September 30, 2013 (Closed; all resolutions passed)

• Resolutions from ASC OP annual meeting in 2013 at Photonics West.
• Ballot 2013-3: DOC
• OP Membership roster as of august 2013: PDF
• ASC OP Procedures 03-14-13 approved by ANSI: PDF
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: Due February 28, 2013 (Closed; standard approved, however revisions are required based on comments received. Once complete, the standard will be re-balloted)

• Adoption of BSR/OEOSC OP1.0110-12, American National Standard for Optics and Electro-Optical Instruments –Preparation of drawings for optical elements and systems –Part 12: Apheric Surfaces: PDF
• Ballot 2013-3: DOC PDF
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: Due date extended to February 25, 2013 (Closed; standards approved. However OP1.0110-9 will be revised based on comments received. Once complete, the standard will be re-balloted

• Adoption of multiple standards as American National Standards
• BSR/OEOSC OP1.0110-9, American National Standard for Optics and Electro-Optical Instruments –Preparation of drawings for optical elements and systems –Part 9: Surface treatment and coating: PDF
• BSR/OEOSC OP1.0110-11, American National Standard for Optics and Electro-Optical Instruments –Preparation of drawings for optical elements and systems –Part 11: Non-toleranced data: PDF
• BSR/OEOSC OP1.9211-1, American National Standard for Optics and Electro-Optical Instruments –Optical coatings –Part 1: Definitions: PDF
• BSR/OEOSC OP1.9211-2, American National Standard for Optics and Electro-Optical Instruments –Optical coatings –Part 2: Optical properties: PDF
• BSR/OEOSC OP1.9211-3, American National Standard for Optics and Electro-Optical Instruments –Optical coatings –Part 3: Environmental durability: PDF
• Ballot: DOC, PDF
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: Extended to January 31, 2013 (Closed - standard reaffirmed with comments)

• Reaffirmation of ANSI/OEOSC OP3.001 Optical Glass
• ANSI/OEOSC OP3.001, American National Standard for Optics and Electro-Optical Instruments –Optical Glass: PDF
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF 5: July 1, 2012 Due Date (closed - project initiation approved)

• Project Initiation, Aspheric Metrology
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: June 30, 2012 Due Date (Closed; ballot failed to pass)

• BSR/OEOSC OP1.004, Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Optical Wavefront Measurement: PDF
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF
• Negative ballot and comments: PDF

ASC OP: May 10, 2012 Due Date (Closed; all resolutions passed)

• Resolutions from ASC OP meeting on January 23rd, 2012 at Photonics West.
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF
• Minutes from ASC OP meeting on January 23, 2012. PDF
• OP Membership roster per PW 2012 meeting: PDF
• ASC OP Procedures 01-23-12 Proposed PDF

ASC OP: January 15, 2012 Due Date (Extended to January 31, 2012)

• BSR/OEOSC OP1.0110-12, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 12: Aspheric surfaces: PDF
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF 4: December 31, 2011 Due Date

• BSR/OEOSC OP1.0110-11, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 11: Non-toleranced data: PDF
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: December 19, 2011 Due Date

• BSR/OEOSC OP1.0110-9, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 9: Surface treatment and coating: PDF
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF 3: September 30, 2011 Due Date

• TF 3/OEOSC OP1.004, Proposed American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Optical Wavefront Measurement: PDF
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: June 1, 2011 Due Date

• Resolutions from ASC OP meeting on January 24th, 2011 at Photonics West.
• Ballot: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

ASC OP: June 1, 2011 Due Date - EXTENDED TO JUNE 10

• TF 4/OEOSC OP1.0110-10, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 10: Table representing data of optical elements and cemented assemblies: PDF
• Ballot, Revision 1: DOC
• Voting Summary: PDF
• Ballot Tabulation: PDF

TF 4: August 19, 2010 Due Date

• TF 4/OEOSC OP1.0110-9, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 9: Surface treatment and coating: PDF
• Ballot: PDF

TF 4: August 15, 2010 Due Date

• TF 4/OEOSC OP1.0110-12, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 12: Aspheric surfaces: PDF
• Ballot: PDF

OP: July 23, 2010 Due Date

• BSR/OEOSC OP1.0110-10, Proposed American National Standard for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 10: Table representing data of optical elements and cemented assemblies.: PDF
• Ballot: PDF

OP: November 13, 2009 Due Date

• BSR/OEOSC OP1.110-1 OP Final, Proposed American National Standard – for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 1: General.: PDF
• Ballot: PDF, HTML
• Voting Results: PDF
• Submitted Ballots: PDF

TF 4: August 21, 2009 Due Date

• BSR/OEOSC OP1.110-10, Proposed American National Standard – for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 10: Table representing data of optical elements and cemented assemblies: PDF
• Ballot: PDF
• Voting Results: HTML
• Submitted Ballots: PDF

TF 4: July 5, 2009 Due Date

• BSR/OEOSC OP1.110-1 Proposed American National Standard – for Optics and Electro-Optical Instruments – Preparation of drawings for optical elements and systems – Part 1: General.: PDF, HTML
• Ballot: PDF
• Voting Results: HTML
• Submitted Ballots: PDF

OP: August 2030, 2008 Due Date

• BSR/OEOSC OP1.002 (July 7August 11, 2008) American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Appearance Imperfections: PDF, HTML
• Ballot: PDF, HTML

TF 2: July 19, 2008 Due Date

• BSR/OEOSC OP1.002, American National Standard for Optics and Electro-Optical Instruments – Optical Elements and Assemblies – Appearance Imperfections: PDF, HTML
• Ballot: PDF, HTML

OEOSC, ISO/TC172, ASC/OP, CALENDAR, DIRECTORY, SC/WG, NEWS, HOME

Optics and Electro-Optics Standards Council
Administration for US TAG to ISO/TC172 - Optics and Photonics
ASC/OP - Committee for Optics and Electro-Optical Instruments

CORPORATE, PROFESSIONAL SOCIETY AND TRADE ORGANIZATION SPONSORS

Legal Disclaimer and Notice of Copyright by OEOSC

Please send your comments or suggestions to Webmaster
This page was last updated June 4, 2021
http://www.optstd.org/